Start with good records
Most storage problems are record-keeping problems. Before a vial goes into the fridge or freezer, make sure you can answer where it came from and what has happened to it since.
- Log the batch number, date received and the condition of the packaging on arrival.
- Keep the batch certificate of analysis alongside your own notes.
- Record the storage location, and any time a vial is moved, split or opened.
- Label every vial and aliquot so it can be traced without guessing.
Lyophilised (freeze-dried) vials
Supplied as a dry powder, a peptide is at its most stable. The aim is simply to keep it that way.
- Leave the vial sealed until you need it. Every opening lets in moisture and air.
- Let a cold vial reach room temperature before opening, so condensation does not form on the powder.
- Keep vials in their original box or an opaque container, away from direct light.
- Avoid repeated swings between cold and warm. Stable beats cold-then-warm-then-cold.
Reconstituted solutions
Once a peptide is in solution it is far less stable than the powder, and bacterial contamination becomes a risk.
- Label with the compound, concentration, diluent and preparation date.
- Use clean technique and sterile consumables, and wipe the stopper before each puncture.
- Store refrigerated and minimise how long the solution is kept.
- If a solution must be frozen, divide it into single-use aliquots first so nothing is frozen and thawed more than once.
Temperature, light and moisture
- Use a monitored fridge or freezer with a thermometer you can check, not a guess at the dial setting.
- Keep containers dry and tightly closed. A desiccant sachet in the outer container is cheap insurance.
- Keep time out of storage short when weighing, reconstituting or aliquoting.
- If storage goes out of range (a power cut, a door left open), note it, and treat the affected material with caution.
What the storage terms mean
| Condition | Typical range | Practical note |
|---|---|---|
| Room temperature | about 15–25 °C | Fine for short periods such as transit or while working at the bench. |
| Refrigerated | 2–8 °C | Usual for reconstituted solutions and short-term storage of powder. |
| Frozen | about −20 °C | Common choice for long-term storage of lyophilised powder and aliquots. |
| Ultra-low | about −80 °C | Used where maximum stability is wanted, usually for reference material. |
Ranges are general laboratory conventions. Always follow the storage statement on the batch documentation, which takes priority.
Why cold helps
Peptides break down through chemical routes such as oxidation and deamidation, and through physical ones such as aggregation. All of these speed up as temperature rises, and water accelerates most of them. That is why a dry powder held cold is the most stable form, and why a warm solution is the least.
Why the sequence matters
Some residues are more fragile than others. Methionine and cysteine oxidise easily, and asparagine and glutamine are prone to deamidation. Two peptides of the same size can therefore behave very differently in storage.
Light
Light, especially ultraviolet, can damage aromatic and sulphur-containing residues. Copper-containing peptides can also change in appearance when exposed to light and air. Amber glass, original packaging or a closed box keep exposure low.
Powder and solution are different materials
A lyophilised vial and a reconstituted solution of the same peptide should be treated as two separate materials with separate handling and separate time limits.
What this guide does not tell you
It does not set shelf lives or expiry dates for any specific compound. Stability depends on the sequence, the diluent, the concentration and the conditions. Where you need a figure, generate it with your own stability testing.
Research-use boundary
This guide covers handling of laboratory materials. It does not describe, and Aviora does not support, any use in humans or animals.
Research checklist
- Batch number, receipt date and COA filed
- Storage location and temperature recorded
- Every vial and aliquot labelled with compound, concentration and date
- Single-use aliquots prepared before any freezing
Frequently asked questions
Do I need to freeze a lyophilised vial?
Not for short periods. Refrigeration is common for the short term and a freezer for the long term, but defer to the storage statement for your batch.
Why should I let a vial warm up before opening it?
Opening a cold vial in warmer air draws moisture onto the powder. Moisture is one of the main drivers of degradation.
Is it a problem if a parcel is warm on arrival?
Lyophilised powder tolerates short periods at ambient temperature in transit. Move it to storage promptly and record the date.
Sources
- ICH Q1A(R2), Stability Testing of New Drug Substances and Products. Defines the long-term, intermediate and accelerated storage conditions.
- Manning MC, et al. Stability of protein pharmaceuticals: an update. Pharm Res. 2010. Review of chemical and physical degradation pathways.