Inputs the calculator uses
- Peptide mass: the amount of lyophilised material in the vial, in mg.
- Diluent volume: how much solvent is added, in mL.
- Target quantity: the amount wanted in each measured portion, in mcg or mg.
- Syringe size: used to convert volume into scale markings.
Concentration formula
Concentration is the mass dissolved per unit volume of liquid.
Multiply by 1,000 to express it in mcg/mL: 2.5 mg/mL is 2,500 mcg/mL.
Draw volume formula
Once you know the concentration, the volume that holds a given amount is the amount divided by the concentration.
Keep the units matched. If the target is in mg, convert it to mcg first (1 mg = 1,000 mcg).
U-100 unit reference
A U-100 syringe is marked in 100 units per mL, so each unit is 0.01 mL.
| Volume | U-100 units |
|---|---|
| 0.05 mL | 5 |
| 0.10 mL | 10 |
| 0.25 mL | 25 |
| 0.50 mL | 50 |
| 1.00 mL | 100 |
A worked example
A 5 mg vial is reconstituted with 2 mL of diluent, and a 250 mcg portion is wanted.
| Quantity | Value | Where it comes from |
|---|---|---|
| Peptide mass | 5 mg | Measured (vial label / batch record) |
| Diluent volume | 2 mL | Measured (what you add) |
| Concentration | 2.5 mg/mL | 5 ÷ 2 |
| Draw volume | 0.1 mL | 250 ÷ 2,500 |
| Syringe units | 10 | 0.1 × 100 |
Only two of the five values are measured. The other three are calculated, so any error in the inputs carries straight through.
The same vial also yields about 20 portions of 250 mcg (5,000 mcg ÷ 250 mcg), before allowing for dead space and losses.
What the arithmetic does not establish
The formulas assume the vial contains exactly what the label says and that the peptide stays intact in solution. They cannot confirm either. Fill accuracy, purity and stability need separate verification.
Limitations
- Check inputs independently. A mistyped vial size or diluent volume gives a confident but wrong answer.
- Syringe dead space, bubbles and graduation tolerance all add real-world error.
- Calculated results are theoretical. Verify against your own procedures and records.
- Confirm the batch and its documentation match the vial in front of you.
Research checklist
- Batch identity confirmed against the certificate of analysis
- Vial mass and diluent volume entered from records, not memory
- Result cross-checked by hand using the formulas above
- Use limited to controlled laboratory research
Frequently asked questions
Does adding more diluent change the amount of peptide?
No. The mass in the vial stays the same. More diluent only lowers the concentration, so a larger volume is needed to hold the same amount.
Why is the draw volume sometimes very small?
A concentrated solution means a small volume holds the target amount, and small volumes are harder to measure accurately. Adding more diluent gives a larger, easier-to-read volume.
Can the calculator tell me what amount to use?
No. It converts between mass, volume and scale markings. It does not recommend any quantity for any compound.